/docs/hardware/industrial-io/ Recent content in Industrial IO on Bolt Data Connect Hugo -- gohugo.io en /docs/hardware/industrial-io/gen_01/ Mon, 01 Jan 0001 00:00:00 +0000 /docs/hardware/industrial-io/gen_01/ <p>Gen 1 IoT Industrial IO is based on the Facts Engineering Productivity1000 IO modules and the ProductivityOpen P1AM-100 controller with the P1AM-ETH ethernet shield.</p> <figure class="doc figure"><img src="/docs/hardware/industrial-io/gen_01/assets/P1000_OnlineMode.JPG" alt="IoT Industrial IO"/><figcaption> <p>IoT Industrial IO</p> </figcaption> </figure> <p>The switch on the P1AM-100 controller determines the operating state of the device. There are currently 2 modes of operation.</p> <ol> <li><strong>Management Mode</strong>: <em>[Switch DOWN]</em> This mode allows for troubleshooting through a web interface. See <a href="./troubleshooting">Troubleshooting</a> for more information.</li> <li><strong>Online Mode</strong>: <em>[Switch UP]</em> This is the normal operating mode for the device. Once enabled, the device connects to the Gateway and publishes its IO status.</li> </ol>